Netgear Extender Not Connecting to Verizon Fios Router?
Netgear wireless extenders are universal extenders. That means these extenders can be connected to any router. If your extender has trouble connecting to Verizon Fios router then you should try certain fixes before contacting the support team.
Let us tell you getting stuck while setting up the Netgear extender is not a new thing. There is a plethora of users experiencing similar concerns. But know that resolving the problem is fairly simple.
Continue giving this guide a thorough read to learn what you should do now so that you can carry out the extender and Verizon Fios router connection.
WiFi Extender Not Connecting to Verizon Fios Router: RESOLVED
Here’s what you should do if the connection between the Verizon Fios and Netgear extender fails:
1. Reset the Extender
Your extender should be running on the default factory values when you’re trying connecting to Verizon Fios router. If you cannot set up the extender the very first reason could be configurations on the extender. Thus delete any custom configurations from the extender by resetting it. To reset it:
- Detach other cables from the extender and let only the power cable remain connected.
- Your extender must be powered on when you’re resetting it. Hence be sure of supplying a steady power to it.
- A sharp and pointed object is required now. The Reset button resides inside a tiny hole. To press the button, use an object like an oil pin.
- Hold it for about 10 seconds and release it.
- It’ll take some time for the extender to restore the default settings.
- The device will reboot itself once the process is successfully executed.
Now, power off the Netgear extender for some time. You’re proceeding to connect the extender to the Fios router.
2. Connect Using a LAN Cable
Netgear extenders can connect wired or wirelessly to the root routers. It is suggested to opt for a wired connection to prevent any signal disconnections. Therefore, use a LAN cable now and insert it into the LAN port on the Fios router and the Internet port on the Netgear extender. You should ensure that the:
- LAN cable is up to mark and non-damaged.
- Ports used to insert the cable are clean and in good condition.
- The connection established by you is well in place and nowhere near loose.
You can now set up your Netgear extender using the Netgear Nighthawk extender login details.
How to Set Up Netgear Extender with Verizon Fios Router?
- Plug the Verizon Fios router into a well working power socket.
- Next, plug in the Netgear extender.
- Once the extender is booted up completely, join its WiFi on a computer or laptop. You can also connect using an Ethernet cable.
- Run an internet browser and visit mywifiext.net on it. You can use the IP 192.168.1.250 also instead of the URL.
- Reaching the login page, use the admin credentials to log in to the extender.
- Now accept the terms and conditions to proceed ahead.
- When prompted to choose the network to be extended, select Fios router’s details.
- Add a new network name for the extended network. Also, assign a WiFi password.
- You should also update the admin password to the extender. The same password will be used to log in to your Netgear extender further.
- Implement the instructions as they appear on the screen.
- The final page will show you the configuration settings made by you.
- Save the settings and you will be done setting up your Netgear WiFi extender.
Wrapping It All Up
It is an easy task to set up a Netgear WiFi extender. In case your extender is having trouble connecting to Verizon Fios router, then applying the solutions discussed in this post should remove the obstacles. You can easily set up your extender now. Once the WiFi extender is set up, move it somewhere in between the Verizon Fios router and WiFi dead zones.