Netgear EAX18 Setup | AX1750

Netgear Nighthawk AX1750 EAX18 4-stream mesh extender is intended for delivering fast speed, more coverage, and great performance. This WiFi 6 extender allows you to stream in ultra HD 4K/8K, do video calls, and much more without getting slowed down or interrupted. Perform Netgear EAX18 setup and upgrade your WiFi to the first class.

This page will let you know the complete process of Netgear Nighthawk AX1750 EAX18 WiFi extender setup. Continue reading.

How to Setup AX1750 4-Stream WiFi Mesh Extender EAX18 Via WPS Button?

In order to setup the Netgear AX1750 EAX18 WiFi range extender using WPS push button, do the following:

  • Place the extender and WiFi router in the same room.
  • Power on the AX1750 WiFi mesh extender model EAX18.
  • Wait for the Power LED on EAX18 to light green.
  • Press the WPS button on the extender.
  • Now, press the WPS button on your WiFi router.
  • If the Netgear EAX18 LED lights white, the connection between your router and extender is good.
    Note: If your home router supports the 5 GHz band, your extender attempts to connect to the router’s 5 GHz band once you press the WPS button for the very first time. If your extender did not connect to the router’s 5 GHz band the first time, it may result in a lot of issues during the Netgear EAX18 setup. To resolve such issues at the earliest, get in touch with our experts via email or live chat.
  • Move your extender to a new location you like.
  • Connect your WiFi-enabled computer or mobile device to the extended network.
Netgear Nighthawk AX1750 EAX18 Setup

That’s how you can complete your Netgear extender EAX18 setup using WPS button. If you come across any type of technical issue during the setup process, feel free to contact our experts.

Netgear Nighthawk EAX18 Setup Using Nighthawk App

Follow these steps to perform Netgear Nighthawk EAX18 Setup using the Nighthawk app:

  • First of all, ensure that your mobile device is connected to the internet.
  • Now, turn on your AX1750 EAX18 extender.
  • Download the Nighthawk app on your Android or iOS device.
  • After that, open the Nighthawk app on your smartphone.
  • Follow the on-screen installation steps to complete your Netgear Nighthawk EAX18 AX1750 setup.

Still can’t set up your WiFi extender? Don’t worry! Contact our knowledgeable and skilled technicians and set up your Nighthawk AX1750 4-stream WiFi 6 mesh extender EAX18 from the comfort of your home.

Netgear Nighthawk AX1750 EAX18 Setup Using Web Interface

Follow the steps given below to perform the Netgear Nighthawk AX1750 EAX18 setup through the web interface:

  • Turn on your Netgear AX1750 dual-band WiFi mesh extender model EAX18.
  • Wait for the Power LED to light green.
  • Connect your Netgear EAX18 WiFi range extender to the existing router using a WiFi or Ethernet connection.
  • Launch a web browser from a computer or mobile device and enter If this web address is not working on your device, contact our experts for quick help.
  • The Netgear EAX18 login page displays.
  • Follow the prompts to connect your extender to the existing WiFi network.
  • Move your extender to a new location you like.
  • After you find the best location for your extender, connect your client devices to the extended WiFi network.

If you still can’t set up your Netgear EAX18 AX1750 extender, get in touch with our highly-experienced technicians.

Netgear AX1750 EAX18 WiFi Range Extender Setup Issues

  • WiFi extender is connected but no internet
  • MAC address filtering errors
  • Can’t access after update on EAX18
  • Unable to update Netgear firmware
  • Lost configuration CD
  • Netgear extender’s default web address is not working
  • WiFi extender is not connected to the network
  • EAX18 drops internet connectivity
  • Forgot Netgear extender default password
  • Can’t find Netgear range extender network name
  • Netgear genie app doesn’t open
  • Issues while accessing IP address
  • Netgear AX1750 EAX18 not working due to failed update
  • Incorrect Netgear extender password
  • Extender’s LED lights are not stable
  • Netgear extender red light
  • doesn’t open
  • No internet after the Netgear EAX18 setup
  • Can’t access the Netgear EAX18 login webpage
  • Unable to perform Netgear extender reset
  • Netgear genie smart setup page continues to appear even after Netgear AX1750 EAX18 WiFi Range Extender Setup
  • WiFi connectivity issues
  • Netgear Extender not working
  • WiFi extender not connecting to internet
  • Internet connected but not working
  • Can’t set up Netgear EAX18 WiFi range extender on Mac or iOS devices
Netgear AX1750 EAX18 Setup

Fix all such Netgear EAX18 setup issues within minimal time by getting in touch with our experts.

Netgear AX1750 EAX18 Manual

When you buy a brand new Netgear AX1750 EAX18 mesh extender, you will get a manual in the package. This Netgear EAX18 manual contains a series of setup steps from starting to end. In order to setup Netgear AX1750 EAX18 extender, you need to simply walk through the Netgear AX1750 setup steps given in the manual.

However, understanding these installation instructions is very difficult for regular users. The best way to install your Netgear EAX18 AX1750 WiFi extender with great ease is to contact our professionals. They will guide you each and every step helping you complete the Netgear AX1750 EAX18 setup properly.

Netgear EAX18 Firmware Update | AX1750

Does your WiFi extender, all of sudden, start behaving weirdly? Is it not providing the required speed even after a successful Netgear EAX18 setup? If yes, then update firmware on Netgear extender right away. Here’s how to perform Netgear EAX18 firmware update:

  • First and foremost, turn on your AX1750 WiFi extender.
  • Connect a PC, laptop, or mobile device to a WiFi network.
  • Once done, open a web browser as per your choice.
  • Log in to your extender using the username and password.
  • Go to the Settings menu and click on the Firmware Update option.
  • Thereafter, click on the Check button.
  • If there is any new firmware version available, click on the Yes button for Netgear AX1750 EAX18 firmware update.
  • Now, wait for some time and let the Netgear extender AX1750 firmware update properly.

That’s it! Your extender’s firmware has been updated. In the case of any difficulty, feel free to contact our experts.

Troubleshooting Tips to Fix Netgear AX1750 EAX18 Setup Issues

Go through the below-mentioned troubleshooting steps to fix Netgear AX1750 EAX18 extender setup issues:

  • If you are getting issues while logging into your Netgear AX1750 EAX18 extender, be certain that you entered the correct URL in the address bar.
  • Check all the wired connections. Do not use any damaged cable.
  • Use only the latest version of web browser during Netgear EAX18 login.
  • Confirm that the wall plug in which the extender is plugged in is not damaged or short-circuited.
  • Power cycle your Netgear extender once and try to set it up again.
  • Make sure that the Netgear EAX18 extender is receiving proper power supply from the wall outlet.
  • Access high-speed internet connection on your device.
  • Reset the extender to its factory default settings.
  • Keep your extender away from walls, room corners, microwave ovens, fish tanks, cordless phones, Bluetooth devices, metal objects, aluminum studs, etc.
  • Update the latest Netgear AX1750 EAX18 firmware version on your extender.

None of the aforementioned troubleshooting tips resolve your issues? Don’t panic. Just reach out to our technicians and fix your Netgear AX1750 EAX18 WiFi range extender setup issues.

Netgear AX1750 EAX18 FastLane Setup

FastLane Technology provides you with maximum WiFi performance. Basically, it offers high-speed WiFi connection with a dedicated band connecting the WiFi router to your extender and a second band connecting the WiFi device and extender. Here’s how to perform the Netgear AX1750 EAX18 FastLane Setup:

  • Connect your client device to a WiFi network.
  • After that, open any web browser such as Microsoft Edge, Google Chrome, or Internet Explorer.
  • Access the Netgear AX1750 EAX18 extender login web page.
  • Enter the username and password when prompted.
  • On the Netgear Genie page, click on the ‘FastLane’ option.
  • Now, you will get two options: ‘Device-to-extender in 2.4 GHz only and extender-to-router in 5 GHz only’ and ‘Device-to-extender in 5 GHz only and extender-to-router in 2.4 GHz’.
  • Select any option you like and click on the Save button.

In case you stuck at any step while enabling the FastLane Technology on your extender, don’t hesitate to contact our experts for on-the-spot solutions.